Page 24 of 38
Re: Introducing FiveTech's fivedit
Posted: Thu Oct 19, 2017 8:30 pm
by Rick Lipkin
Otto
Cristobol has done some VERY FINE work with FiveEdit and I am looking at it very seriously! ... there is a LOT of functionality to take in .. I like the editor and the jump lists.
At this point I have not created any projects or compiled any programs.
Rick Lipkin
Re: Introducing FiveTech's fivedit
Posted: Thu Oct 19, 2017 9:34 pm
by cnavarro
Rick Lipkin wrote:
At this point I have not created any projects or compiled any programs.
Rick Lipkin
Rick, if you need help for this, tell me
Re: Introducing FiveTech's fivedit
Posted: Fri Oct 20, 2017 8:17 am
by byte-one
Cristobal has his program compressed with UPX.
https://upx.github.io/
Re: Introducing FiveTech's fivedit
Posted: Fri Oct 20, 2017 11:00 am
by cnavarro
Gunther, thanks
I use now upx
Re: Introducing FiveTech's fivedit
Posted: Sun Oct 22, 2017 10:06 am
by Marc Vanzegbroeck
Hi Cristobal,
I just downloaded FiveEdit, and run it, and it's looking very nice
I have a question about key-settings.
Since I'm started programming in clipper with the brief-editor.
I'm used to work with those combinations.
Then I moved to MultiEdit. There was a Brief-emulator options.
So I still use that same MultiEdit program.
Is there a posibility to set your own Key-shortcuts?
So for example
'+' : copy line to clipboard
'Ins' : insert clipboard
...
Re: Introducing FiveTech's fivedit
Posted: Sun Oct 22, 2017 10:28 am
by cnavarro
Mark, thanks
That is a possibility that I intend to implement at the end, when I already have all the possible keys and actions defined.
Notice that in the preferences folder, there is a tab that puts menus
But it is not yet functional
Re: Introducing FiveTech's fivedit
Posted: Mon Oct 23, 2017 7:12 am
by Marc Vanzegbroeck
Cristobal,
I did some settings in FiveEdit, but didn't found where I can set those lines.
I also have a suggestion that would be nice.
In MultiEdit there is a possibility to select a block (not the complete line), and paste it.
I like that function a lot
Re: Introducing FiveTech's fivedit
Posted: Mon Oct 23, 2017 8:33 am
by Otto
Hello Marc,
column mode in FIVEDIT.
You start with “Shift” + “Alt” at the left.
Line at Column limit:
What I did is to set a different color after "Column limit".
View
Editor
Column limit; here select a different color.
But sure you can set a line too.
Cristobal will have a solution.
Best regards,
Otto
Re: Introducing FiveTech's fivedit
Posted: Mon Oct 23, 2017 9:26 am
by cnavarro
Otto, thanks
Line limits, please see
http://www.scintilla.org/ScintillaDoc.h ... ETEDGEMODEand, soon, I will try to let the user decide the column(s) in which he wants the line to appear
Re: Introducing FiveTech's fivedit
Posted: Mon Oct 23, 2017 10:12 am
by cnavarro
In the next version ( today or tomorrow ): Multipaste actived
Re: Introducing FiveTech's fivedit
Posted: Mon Oct 23, 2017 8:04 pm
by Marc Vanzegbroeck
Hi,
Is there a setting where we can say what characters are comments?
Sometimes in my programs I use * for comments like this
Example MultiEdit
Example Fivedit
Another question:
Where can I say that the color of ENDIF is the same as IF ?
In the Fivedit example, you can see that it's not the same.
Now it's showing how it is if the lines are it comment-out
Another suggestion
It would be nice that the open files ar sorted (like in MultiEdit)
I must say, fine job so far. I have almost the same color-settings and fonts like I had setted in MultiEdit.
That's nice, since I'm used to that
Re: Introducing FiveTech's fivedit
Posted: Tue Oct 24, 2017 12:25 am
by cnavarro
Marc Vanzegbroeck wrote:Hi,
Another question:
Where can I say that the color of ENDIF is the same as IF ?
In the Fivedit example, you can see that it's not the same.
Now it's showing how it is if the lines are it comment-out
Preferences - Editor - INIT STRUCT = END STRUCT ( colors )
Re: Introducing FiveTech's fivedit
Posted: Tue Oct 24, 2017 6:03 am
by Marc Vanzegbroeck
Hi,
Today I wanted to open my project again, but get always this error
Code: Select all | Expand
Application
===========
Path and name: C:\_vmsdata\FWH\FiveEdit\fivedit.exe (32 bits)
Size: 5,825,536 bytes
Compiler version: Harbour 3.2.0dev (r1603301435)
FiveWin Version: FWH 16.05
Windows version: 6.2, Build 9200
Time from start: 0 hours 0 mins 22 secs
Error occurred at: 24/10/2017, 08:01:41
Error description: Error BASE/1004 Message not found: TPANEL:NORDEN
Args:
[ 1] = O TPANEL
Stack Calls
===========
Called from: => __ERRRT_SBASE( 0 )
Called from: ../../../tobject.prg => TPANEL:ERROR( 0 )
Called from: ../../../tobject.prg => (b)HBOBJECT( 0 )
Called from: ../../../tobject.prg => TPANEL:MSGNOTFOUND( 0 )
Called from: ../../../tobject.prg => TPANEL:NORDEN( 0 )
Called from: .\source\classes\TFIVEDIT.PRG => TFIVEDIT:BUILDEDITOR( 1670 )
Called from: .\source\classes\TFIVEDIT.PRG => TFIVEDIT:OPENFILE( 6640 )
Called from: .\source\classes\TFIVEDIT.PRG => TFIVEDIT:OPENPROJECT( 6819 )
Called from: .\source\classes\TFIVEDIT.PRG => (b)TFIVEDIT_MENUPROJECT( 4544 )
Called from: .\source\classes\MENU.PRG => TMENU:COMMAND( 1226 )
Called from: .\source\classes\WINDOW.PRG => TFIVEDITWND:COMMAND( 1118 )
Called from: => TWINDOW:HANDLEEVENT( 0 )
Called from: \FWH\FWHTEAM\SAMPLES\fivedit.prg => TFIVEDITWND:HANDLEEVENT( 2983 )
Called from: .\source\classes\WINDOW.PRG => _FWH( 3348 )
Called from: => SYSREFRESH( 0 )
Called from: .\source\classes\MENU.PRG => TMENU:ACTIVATE( 1256 )
Called from: .\source\classes\BTNBMP.PRG => TBTNBMP:LBUTTONUP( 895 )
Called from: .\source\classes\CONTROL.PRG => TCONTROL:HANDLEEVENT( 1721 )
Called from: .\source\classes\BTNBMP.PRG => TBTNBMP:HANDLEEVENT( 1847 )
Called from: .\source\classes\WINDOW.PRG => _FWH( 3348 )
Called from: => WINRUN( 0 )
Called from: .\source\classes\WINDOW.PRG => TFIVEDITWND:ACTIVATE( 1074 )
Called from: .\source\classes\TFIVEDIT.PRG => TFIVEDIT:ACTIVATE( 740 )
Called from: \FWH\FWHTEAM\SAMPLES\fivedit.prg => MAIN( 105 )
Re: Introducing FiveTech's fivedit
Posted: Tue Oct 24, 2017 8:43 am
by cnavarro
Mark,
can you explain step by step what you have done until you get to the error?
Re: Introducing FiveTech's fivedit
Posted: Tue Oct 24, 2017 9:21 am
by Marc Vanzegbroeck
Hi,
I used the exe-version of:
https://bitbucket.org/fivetech/fivewin- ... edit53.zip1 - I Open Fivedit
2 - CTRL-J
3 - Select project
4 - Error...