config/harbour/Application file for UEStudio

[Otto]

Hello friends,
can please someone share a config/harbour/Application file for UEStudio?

Thank you in advance
Otto

[dutch]

Dear Otto,

This is "Application" that I use with xHarbour and some none-standard FWH library.

Code: Select all  Expand view

# --------- xHarbour y FWH configuration --------
# --- general --------------------------------------
# $P  - project name
# $Pp - path to project directory
# $Pn - project name
# --- compile --------------------------------------
# $I  - input full name
# $Ip - input path
# $In - input name
# $Ie - input extension
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for compiler
# --- build ----------------------------------------
# $T  - target full name
# $Tp - target path
# $Tn - target name
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for linker

[Settings]
Target =
Category&01 = DEFAULT RUN CONFIGURATION
Working Directory =.
Command Line Arguments =

Category&02 = Harbour Options
Automatic Memvar Declaration = no|yes
Variables Are Assumed = no|yes
Generate Preprocessed Output = no|yes
Warning Level = 1|2|3|4|0
User Include Path =
User Defines =

Compiler Options =
Linker Options = /HEAP: 0x10000, 0x1000

Excluded Files = Excludes

[SettingsInfo]
Target = Provides a space for you to specify an output file and location of the program that the linker creates.
Working Directory = Provides a space for you to specify the directory in which executing occurs. If you do not specify a directory, executing occurs in the directory where the executable is located.
Command Line Arguments = Provides a space for you to specify command-line arguments you want to pass to the program at startup.
Compiler Options = Provides a space for you to specify an additional compiler options.
User Defines = Shows the switches the tool will use to build. Use ';' as delimiter.
Linker Options = Provides a space for you to specify an additional linker options.
Excluded Files = This will exclude the file(s) included in this UE project group from the build.

[SettingsReps]
User Defines = @[;|-D%s]
Automatic Memvar Declaration = no=|yes=/a
Variables Are Assumed = no=|yes=/v
Generate Preprocessed Output = no=|yes=/p
User Include Path = ^^@[;|;%s]
User Include Path&1 = ^^@[;| /i%s]
Use Multi Thread Library = no|yes
Warning Level = @/w%s

[Variables]
FWH = D:\FWH1901
HPATH = D:\xHarbour1803
CPATH = D:\bcc73

HPATHL = $(HPATH)\LIB
CPATHL = $(CPATH)\LIB

HOPT = /n /gc0 /q $(Compiler Options) /i$(HPATH)\INCLUDE $(User Include Path&1) $(User Defines) $(Automatic Memvar Declaration) $(Variables Are Assumed) $(Generate Preprocessed Output) $(Warning Level)
COPT = -O2 -M -c -v -I$(HPATH)\INCLUDE -D__HARBOUR__ -D__FLAT__

LOPT = -Gn -aa -Tpe -s -v
LIBS0 = $(HPATHL)\LibMySql.lib
LIBS1 = $(FWH)\LIB\FiveHX.lib $(FWH)\LIB\FiveHC.lib
LIBS2 = $(HPATHL)\rtl.lib $(HPATHL)\vm.lib $(HPATHL)\gtgui.lib $(HPATHL)\lang.lib $(HPATHL)\macro.lib $(HPATHL)\rdd.lib $(HPATHL)\dbfntx.lib $(HPATHL)\dbfcdx.lib $(HPATHL)\dbffpt.lib $(HPATHL)\hbsix.lib $(HPATHL)\debug.lib $(HPATHL)\common.lib $(HPATHL)\pp.lib $(HPATHL)\codepage.lib $(HPATHL)\pcrepos.lib $(HPATHL)\ct.lib $(HPATHL)\hbzip.lib $(HPATHL)\zlib.lib
LIBS3 = $(CPATHL)\cw32.lib $(CPATHL)\import32.lib $(CPATHL)\psdk\odbc32.lib $(CPATHL)\psdk\msimg32.lib $(CPATHL)\psdk\nddeapi.lib $(CPATHL)\psdk\iphlpapi.lib  $(CPATHL)\psdk\rasapi32.lib $(CPATHL)\psdk\psapi.lib $(CPATHL)\wininet.lib $(HPATHL)\PNG.lib $(CPATHL)\psdk\GdiPlus.lib $(CPATHL)\psdk\Shell32.lib
LIBS4 = $(FWH)\LIB\TWBRW32X.LIB $(FWH)\LIB\SBUTTONX.LIB $(FWH)\LIB\PICKDATE.LIB  $(FWH)\LIB\EZTw32.LIB
LIBS   = $(LIBS0) $(LIBS4) $(LIBS1) $(LIBS2) $(LIBS3)

[Environment]
PATH = $(HPATH)\BIN;$(CPATH)\BIN;%PATH%
INCLUDE = $(HPATH)\INCLUDE;$(CPATH)\INCLUDE;$(FWH)\INCLUDE
LIB = $(HPATH)\LIB;$(CPATH)\LIB;$(FWH)\LIB
BuildMode = %UESMode%

[General]
TargetExt = .EXE
ReleaseOut = Release
DebugOut = Debug
UseFullPaths = 1
UseDosNames = 1
Excludes = $(Excluded Files)
GenerateEDGroup=$(External Dependencies)
.CPP = .C

[MakeCommands]
run = Execute Application
makef = Show Makefile

[Execute Application]
Title = Execute $T
Cmd0 = $(Command Line Arguments)
Depends = $T
ShowWindow = 1
DisplayConsole = $(DCon)

[Show Makefile]
Title=Show makefile
Cmd0=uestudio makefile
ShowWindow=1
DisplayConsole=0

[InsertFiles]

[FileGroups]
FGO = .obj;
FGR = .res;
FGL = .lib;
FGD = .def;

[GroupFormats]
FGO = %s
FGR = %s
FGL = %s

[Build]
Out = $T
Depends = $FGO $FGR
DebugFlag =
ReleaseFlag =
Cmd0 = ilink32 $(LOPT) c0w32.obj $FGO, $T,, $(LIBS),, $FGR

[.PRG]
Out = $In.c
DebugFlag = /b
ReleaseFlag =
Cmd0 = harbour $I $(HOPT) $R /o$O

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.

[.C]
Out = $In.obj
Cmd0 = bcc32 $(COPT) -o$O $I

[.RC]
Out = $In.res
Cmd0 = brc32 -r -fo$O $I

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.
 

[Otto]

Dear Dutch,
Thank you. This is the same file I use. I, too, use xHarbour for production. But I would like to switch to HARBOUR.
I would need this file for HARBOUR.


Best regards,
Otto

[Mike Serra]

Hello Otto:

This is the content of my file "Application" for version 16.10 of Fivewin (for Harbour)

Code: Select all  Expand view

# --------- Harbour y FWH configuration --------
# --- general --------------------------------------
# $P  - project name
# $Pp - path to project directory
# $Pn - project name
# --- compile --------------------------------------
# $I  - input full name
# $Ip - input path
# $In - input name
# $Ie - input extension
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for compiler
# --- build ----------------------------------------
# $T  - target full name
# $Tp - target path
# $Tn - target name
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for linker


[Settings]
Target =
Category&01 = DEFAULT RUN CONFIGURATION
Working Directory =.
Command Line Arguments =

Category&02 = Harbour Options
Automatic Memvar Declaration = no|yes
Variables Are Assumed = no|yes
Generate Preprocessed Output = no|yes
Warning Level = 1|2|3|4|0
User Include Path =
User Defines =

Compiler Options =
Linker Options =

Excluded Files = Excludes

[SettingsInfo]
Target = Provides a space for you to specify an output file and location of the program that the linker creates.
Working Directory = Provides a space for you to specify the directory in which executing occurs. If you do not specify a directory, executing occurs in the directory where the executable is located.
Command Line Arguments = Provides a space for you to specify command-line arguments you want to pass to the program at startup.
Compiler Options = Provides a space for you to specify an additional compiler options.
User Defines = Shows the switches the tool will use to build. Use ';' as delimiter.
Linker Options = Provides a space for you to specify an additional linker options.
Excluded Files = This will exclude the file(s) included in this UE project group from the build.

[SettingsReps]
User Defines = @[;|-D%s]
Automatic Memvar Declaration = no=|yes=/a
Variables Are Assumed = no=|yes=/v
Generate Preprocessed Output = no=|yes=/p
User Include Path = ^^@[;|;%s]
User Include Path&1 = ^^@[;| /i%s]
Use Multi Thread Library = no|yes
Warning Level = @/w%s

[Variables]
FWH = z:\software\SI1610H\FWH
HPATH = z:\software\SI1610H\Harbour
CPATH = z:\software\SI1610H\bcc7
LPATH = z:\software\SI1610H\library
IPATH = Z:\software\SI1610H\projects\SIESTANDAR\source\GeneralSource\include

HPATHL = $(HPATH)\LIB
CPATHL = $(CPATH)\LIB
LPATHL = $(LPATH)\LIBS

HOPT = /n /gc0 /q $(Compiler Options) /i$(HPATH)\INCLUDE $(User Include Path&1) $(User Defines) $(Automatic Memvar Declaration) $(Variables Are Assumed) $(Generate Preprocessed Output) $(Warning Level)
COPT = -O2 -M -c -v -I$(HPATH)\INCLUDE

LOPT = -Gn -aa -Tpe -s -v
LIBS1 = $(FWH)\LIB\FiveH.lib $(FWH)\LIB\FiveHC.lib $(FWH)\LIB\libmysql.lib
LIBS2 = $(HPATHL)\hbwin.lib $(HPATHL)\gtgui.lib $(HPATHL)\hbrtl.lib $(HPATHL)\hbvm.lib $(HPATHL)\hblang.lib $(HPATHL)\hbmacro.lib $(HPATHL)\hbrdd.lib $(HPATHL)\rddntx.lib $(HPATHL)\rddcdx.lib $(HPATHL)\rddfpt.lib $(HPATHL)\hbsix.lib $(HPATHL)\hbdebug.lib $(HPATHL)\hbcommon.lib $(HPATHL)\hbpp.lib $(HPATHL)\hbcpage.lib $(HPATHL)\hbcplr.lib $(HPATHL)\hbct.lib $(HPATHL)\hbpcre.lib $(HPATHL)\xhb.lib $(HPATHL)\hbziparc.lib $(HPATHL)\hbmzip.lib $(HPATHL)\hbzlib.lib $(HPATHL)\minizip.lib $(HPATHL)\png.lib $(HPATHL)\hbusrrdd.lib $(HPATHL)\hbtip.lib
LIBS3 = $(CPATHL)\cw32.lib  $(CPATHL)\uuid.lib $(CPATHL)\import32.lib $(CPATHL)\ws2_32.lib $(CPATHL)\psdk\odbc32.lib $(CPATHL)\psdk\nddeapi.lib $(CPATHL)\psdk\iphlpapi.lib $(CPATHL)\psdk\msimg32.lib $(CPATHL)\psdk\psapi.lib $(CPATHL)\psdk\rasapi32.lib $(CPATHL)\psdk\gdiplus.lib $(CPATHL)\psdk\shell32.lib
# LIBS4 = $(LPATHL)\xaFrxBcc.lib

LIBS = $(LIBS1) $(LIBS2) $(LIBS3)
# LIBS = $(LIBS1) $(LIBS2) $(LIBS3) $(LIBS4)

[Environment]
PATH = $(HPATH)\BIN;$(CPATH)\BIN;%PATH%
INCLUDE = $(HPATH)\INCLUDE;$(CPATH)\INCLUDE;$(FWH)\INCLUDE;$(IPATH)
LIB = $(HPATH)\LIB;$(CPATH)\LIB
BuildMode = %UESMode%

[General]
TargetExt = .EXE
ReleaseOut = Release
DebugOut = Debug
UseFullPaths = 1
UseDosNames = 1
Excludes = $(Excluded Files)
GenerateEDGroup=$(External Dependencies)
.CPP = .C

[MakeCommands]
run = Execute Application
makef = Show Makefile

[Execute Application]
Title = Execute $T
Cmd0 = $(Command Line Arguments)
Depends = $T
ShowWindow = 1
DisplayConsole = $(DCon)

[Show Makefile]
Title=Show makefile
Cmd0=uestudio makefile
ShowWindow=1
DisplayConsole=0

[InsertFiles]

[FileGroups]
FGO = .obj;
FGR = .res;
FGL = .lib;
FGD = .def;

[GroupFormats]
FGO = %s
FGR = %s
FGL = %s

[Build]
Out = $T
Depends = $FGO $FGR
DebugFlag =
ReleaseFlag =
Cmd0 = ilink32 $(LOPT) c0w32.obj $FGO, $T,, $(LIBS),, $FGR

[.PRG]
Out = $In.c
DebugFlag = /b
ReleaseFlag =
Cmd0 = harbour $I $(HOPT) $R /p /n /w

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.

[.C]
Out = $In.obj
Cmd0 = bcc32 $(COPT) -o$O $I

[.RC]
Out = $In.res
Cmd0 = brc32 -r -fo$O $I

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.

 

[Otto]

Hello Mike,
Thank you so much.
For the moment all is working. Sure, I will come up with some more questions.
Best regards,
Otto

[MarioG]

Hello Otto

Can you send me the application file for UEStudio to compile at 64bits?
mario.r.gonzalez@gmail.com; or for here

Many Thanks!

[Otto]

Mario, I am still on 32 bit.
Best regards,
Otto

[MarioG]

Huuuuu... sorry Otto
I didn´t read the posts, with carefully

Regards