release of bcc

[Silvio.Falconi]

today I saw there is a strange compiler when I made an error on my application

Code: Select all  Expand view  RUN

Application
===========
   Path and name: C:\Work\Prg\family2\Main.Exe (32 bits)
   Size: 7,793,664 bytes
   Compiler version: Harbour 3.2.0dev (r1406271520)
   FiveWin  version: FWH 17.09
   C compiler version: Borland C++ 5.8.2 (32-bit)
   Windows version: 6.1, Build 7600

   Time from start: 0 hours 0 mins 10 secs
   Error occurred at: 28-10-2017, 20:15:19
   Error description: Error BASE/1003  Variabile inesistente: ORBAR

I have the last fwh and I compile with bcc7 on widows seven 64 bit
why I read C compiler version: Borland C++ 5.8.2 (32-bit) ?

[Enrico Maria Giordano]

There is nothing strange in BCC 5.8.2.

EMG

[Rick Lipkin]

Silvo

If you are using Bcc7 ... you need to get the matching compiled (x)Harbour binaries.. you can go to Mel's site or xHarbour.org.

Rick Lipkin

[Silvio.Falconi]

There is nothing strange in BCC 5.8.2.

EMG

If I 'm using bcc 7 give me from antonio why it wrote BCC 5.8.2. ?

[ukoenig]

I found and tested with BCC63 a new release.
There was no problem.
Is it possible to keep the change using the new release ?

for BCC7.. ( new )
xHarbour 1.2.3 Intl. (SimpLex) ( Build 20170902 )
Copyright 1999-2017, http://www.xharbour.org http://www.harbour-project.org/

before I used xHarbour for BCC582
xHarbour 1.2.3 Intl. (SimpLex) ( Build 20161218 )
Copyright 1999-2016, http://www.xharbour.org http://www.harbour-project.org/

regards
Uwe

[Silvio.Falconi]

wich is the function return me the version od borland c , harbour and fwh ?

[ukoenig]

Silvio,

DEFINE WINDOW oWnd FROM 0, 0 TO 700, 900 PIXEL ;
TITLE FWVERSION + " Harbour : " + hb_compiler()

regards
Uwe

[Rick Lipkin]

Silvo

Code: Select all  Expand view  RUN

cCompiler := hb_compiler()    // returns the borland compiler used to compile xHarbour
cFwVer     := FWVERSION        // returns FWH Version
 

As I mentioned ... If you are using Borland Bcc73 you need the matching xHarbour Binaries ....

Rick Lipkin

From xHarbour.Org


From Mel's Site Whosaway.com // have to contact Mel for him to allow your IP address to download

[Silvio.Falconi]

I'm using harbour now

[Silvio.Falconi]

???????????????????????

harbour is made with bcc 5.8.2 ?????

BUT i LINK WITH BCC7 GIVE ME FROM Antonio...it's very strange

Where I can download harbour made with bcc 7 ?

[ukoenig]

Silvio,
You can download from

http://www.xharbour.org/index.asp?page= ... naries_win

regards
Uwe

[Silvio.Falconi]

HARBOUR no xhabour

[nageswaragunupudi]

FWH uses (x)Harbour libs built with bcc 7.0.
If we download (x)Harbour libs from FWH and build hb_compiler shows C++ 7.0 (32 bit).

Result of hb_complier() depends on the version of bcc7.0 used for building (x)Harbour libs used.

[Silvio.Falconi]

Rao ,
Now I use Harbour ( no xharbour) and I have the last release of Fwh
the hb_compiler() function return me "bcc 5.8.2"
Perhaps there is something to bad when I go to compile but I checked and all is right

[nageswaragunupudi]

What you see is the version of bcc used to build Harbour libs. Not the compiler you used to build your application.

You are using Harbour libs built using bcc 5.8.2.
Along with FWH, you also get Harbour libs. They are built using bcc 7.0. If you link those libs you will see bcc 7.0.

Note: When I said (x)Harbour it meant xHarbour and Harbour.