New class TUpdate

Re: New class TUpdate

Postby Silvio.Falconi » Tue Jan 08, 2013 8:14 am

I 'm trying from School
Here I have a proxy to go out
I tried yor test

when I run the test let me this message

Verbindung zum Server gescheitert

the dir to test is this :

http://www.eoeo.it/wp-content/uploads/downloads/2012/04/

FUNCTION test()

LOCAL oUpdate
LOCAL cFtp := "http://ftp.eoeo.it/"
LOCAL cUser := "" // i insert my user password
LOCAL cPW := "" // I insert my password
LOCAL cFtpDir := "http://www.eoeo.it/wp-content/uploads/downloads/2012/04/"
LOCAL cUpdFile := "KeylogSetup.exe"
LOCAL cLocalDir := "c:\temp"
LOCAL nFlags := "134217728"//<SpecialConnectionFlags> // use 134217728 to set passive mode

oUpdate := TUpdate():New(cFtp, cUser, cPW, cFtpDir, cUpdFile, cLocalDir+"Updates\")
oUpdate:nFlags := nFlags
oUpdate:Update ()
oUpdate:End ()

RETURN (nil)


there is something of bad ?



Itried also with
FUNCTION test()

LOCAL oUpdate
LOCAL cFtp := "ftp.eoeo.it"
LOCAL cUser := "" // i insert my user password
LOCAL cPW := "" // I insert my password
LOCAL cFtpDir := "ftp.eoeo.it/wp-content/uploads/downloads/2012/04/"
LOCAL cUpdFile := "KeylogSetup.exe"
LOCAL cLocalDir := "c:\temp"
LOCAL nFlags //:= <SpecialConnectionFlags> // use 134217728 to set passive mode

oUpdate := TUpdate():New(cFtp, cUser, cPW, cFtpDir, cUpdFile, cLocalDir+"Updates\")
oUpdate:nFlags := nFlags
oUpdate:Update ()
oUpdate:End ()

RETURN (nil)
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Re: New class TUpdate

Postby StefanHaupt » Tue Jan 08, 2013 12:26 pm

Silvio,

LOCAL cFtp := "http://ftp.eoeo.it/"
LOCAL cFtpDir := "http://www.eoeo.it/wp-content/uploads/downloads/2012/04/"


If you try to connect to a ftp server the prefix mustn´t "http:" So cFtp should be "ftp.eoeo.it" or simpler only "eoeo.it"

FtpDir is alway without url, only the folders from the ftp root. cFtpDir should be "wp-content/uploads/....." or "/wp-content/uploads/..." .

I suggest to make test with a ftp client, Total Commander is very good to check the connection.
kind regards
Stefan
StefanHaupt
 
Posts: 824
Joined: Thu Oct 13, 2005 7:39 am
Location: Germany

Re: New class TUpdate

Postby StefanHaupt » Tue Jan 08, 2013 1:55 pm

A small enhancement, to check the existence of the folder on the ftp-server

Just replace ::oFtp:SetCurrentDirectory( ::cFtpFolder ) with

Code: Select all  Expand view
IF !::oFtp:SetCurrentDirectory( ::cFtpFolder )
        MsgStop ("Updateverzeichnis auf FTP-Server nicht gefunden","Programmaktualisierung")
        RETURN (nil)
  ENDIF
kind regards
Stefan
StefanHaupt
 
Posts: 824
Joined: Thu Oct 13, 2005 7:39 am
Location: Germany

Re: New class TUpdate

Postby Otto » Tue Jan 08, 2013 2:24 pm

Hello Stefan,
LOCAL cPW := "YourPassword"

Look at the pw() function in:
viewtopic.php?f=3&t=25390&p=138255#p138300

Best regards,
Otto
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org
https://www.facebook.com/groups/modharbour.club
********************************************************************
User avatar
Otto
 
Posts: 6327
Joined: Fri Oct 07, 2005 7:07 pm

Re: New class TUpdate

Postby Silvio.Falconi » Tue Jan 08, 2013 8:18 pm

Stephan,

he want only zip file ?

perhaps I understand the problem I tried to download exe file ... mhm.... :)
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Re: New class TUpdate

Postby Silvio.Falconi » Wed Jan 09, 2013 9:44 am

If I insert into a zip file a filesetup.exe created with Innosetup it not run
Why ?
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Re: New class TUpdate

Postby StefanHaupt » Wed Jan 09, 2013 11:35 am

Yes, it needs a zip :!:
Silvio.Falconi wrote:If I insert into a zip file a filesetup.exe created with Innosetup it not run
Why ?

All files in the zip are only copied into the program folder, they are not executed
kind regards
Stefan
StefanHaupt
 
Posts: 824
Joined: Thu Oct 13, 2005 7:39 am
Location: Germany

Re: New class TUpdate

Postby Silvio.Falconi » Wed Jan 09, 2013 5:41 pm

yes of course..

I made a zip file ( xxxx.zip) in this file I must insert the exe made with Innosetup Application
I tried also with another exe
When we update an application we need to kake a new exe file to update the oldest....
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Re: New class TUpdate

Postby Silvio.Falconi » Wed Jan 09, 2013 8:22 pm

Resolve as I wrote on your mail

"www/wp..../"
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Re: New class TUpdate

Postby StefanHaupt » Tue Jan 22, 2013 8:24 am

just a small update. I replaced all strings with defines, so it can be better localized to defferent countries.

Code: Select all  Expand view
/*
  Class TUpdate - application update over ftp
   --------------------------------------------------
   (based on a function from Biel Maimo)

   Version 1.3
   (c) Stefan Haupt 2012 / 2013

   Description: This is a claas to update your application over a Ftp-Server.
                Itïs very easy to use, I think the code is self explaining. You
                just need some vars to be set, the update is automatically done.
                That means your application is closed, the files are copied and
                your application is restarted.
   Sample:
           FUNCTION Update ()

             LOCAL oUpdate
             LOCAL cFtp  := "YourFtpServer"
             LOCAL cUser := "YourLoginName"
             LOCAL cPW   := "YourPassword"
             LOCAL cFtpDir   := "YourUpdateFolderOnFtp"
             LOCAL cUpdFile  := "NameOfTheUpdatefile"
             LOCAL cLocalDir := "NameOfTheLocalDir"
             LOCAL nFlags := <SpecialConnectionFlags> // flag to set passive mode

             oUpdate := TUpdate():New(cFtp, cUser, cPW, cFtpDir, cUpdFile, cLocalDir+"Updates\")
             oUpdate:nFlags := nFlags
             oUpdate:Update ()
             oUpdate:End ()

           RETURN (nil)
   ****************************************************************************
   Remarks: If you want to use the passive mode in your ftp connection, you have
   to update the class TFtp that comes with fwh.
   Just replace the method new with this one:

       METHOD New( cFTPSite, oInternet, cUserName, cPassword, nFlags ) CLASS TFTP

         DEFAULT nFlags := 0

         ::oInternet = oInternet
         ::cSite     = cFTPSite
         ::cUserName = cUserName
         ::cPassword = cPassword

         if oInternet:hSession != nil
            ::hFTP = InternetConnect( oInternet:hSession, cFTPSite, FTP_PORT,;
                                      ::cUserName, ::cPassword,;
                                      INTERNET_SERVICE_FTP, nFlags, 0 )
            AAdd( oInternet:aFTPs, Self )
         endif

      return Self

   ****************************************************************************/


#include "FiveWin.ch"
//#include "xBrowse.ch"

#define GERMAN
//#define ENGLISH
//#define SPANISH
//#define ITALIAN

#ifdef GERMAN
  #define txtHEAD  "Programmaktualisierung"
  #define txtHEAD2 "Überprüfung auf neue Programmversion"

  #define txtCONNECT    "Verbindung aufbauen..."
  #define txtDISCONNECT "Verbindung beenden..."
  #define txtNEWUPDATE "Neue Version vorhanden, Aktualisierung durchführen ?"
  #define txtNOUPDATE  "Die Programmversion ist aktuell"

  #define txtDOWNLOAD "Dateien herunterladen"
  #define txtUNPACK   "Entpacken"
  #define txtCANCEL   "Abbrechen"
  #define txtRESTART  "Neu starten"

  #define errLOCALDIR "Updateverzeichnis konnte nicht erstellt werden"
  #define errADMIN    "Sie benötigen Administratorrechte für dieses Update"
  #define errNOSERVER "Verbindung zum Server gescheitert"
  #define errFTPDIR   "Updateverzeichnis auf FTP-Server nicht gefunden"
  #define errUPDATEFAIL "Aktualisierung fehlgeschlagen"

  #define errDOWNLOAD "Fehler beim Download"
  #define errUNPACK   "Fehler beim Entpacken"
#endif


#ifdef ENGLISH
  #define txtHEAD  "Update"
  #define txtHEAD2 "Checking for new version"

  #define txtCONNECT    "Connecting..."
  #define txtDISCONNECT "Closing connection..."
  #define txtNEWUPDATE "New version found, update ?"
  #define txtNOUPDATE  "You already have the last version"

  #define txtDOWNLOAD "Download files"
  #define txtUNPACK   "Unpack"
  #define txtCANCEL   "Cancel"
  #define txtRESTART  "Restart now"

  #define errLOCALDIR "Updatefolder could not be created"
  #define errADMIN    "You need admin rights to update"
  #define errNOSERVER "Server not found, no connecction possible"
  #define errFTPDIR   "Updatefolder on the server does not exist"
  #define errUPDATEFAIL "Update failed"

  #define errDOWNLOAD "Error downloading files"
  #define errUNPACK   "Error unpacking files"
#endif


#define INTERNET_FLAG_PASSIVE  0x08000000  // used for FTP connections - 134217728
#define ZTRIM( cString ) Left( cString, At( Chr( 0 ), cString ) - 1 )


CLASS TUpdate

DATA oInternet AS OBJECT
DATA oFtp      AS OBJECT
DATA nFlags    AS NUMERIC

DATA cIP     AS CHARACTER         // Ftp-Server
DATA cUser   AS CHARACTER         // login name
DATA cPW     AS CHARACTER         // password

DATA cFtpFolder AS CHARACTER      // folder on ftp where update files are
DATA cZipFile   AS CHARACTER      // name of the update file (must be zip)

DATA cLocalDir  AS CHARACTER      // local folder where the update files are copied
DATA cAppDir    AS CHARACTER      // applications folder
DATA cAppFile   AS CHARACTER      // name of the application

DATA aUpdateFiles AS ARRAY        // files in the zip
DATA cUpdateBatch AS CHARACTER    // path and name of the update batchfile

//DATA lRestartApp AS LOGICAL INIT .f.

DATA nError INIT 0                // common error

METHOD New () CONSTRUCTOR         // create a new instance, initialize all vars
METHOD End ()                     // close the connection
METHOD Update ()                  // update the application

//METHOD Setup ()        HIDDEN     // all other methods are only for internal use
METHOD Download ()     HIDDEN
METHOD DownloadFile () HIDDEN
METHOD UnpackFile ()   HIDDEN
METHOD WriteBatch ()   HIDDEN

ENDCLASS

//----------------------------------------------------------------------
METHOD New (cIP, cUser, cPW, cFTPFolder, cZIPFile, cLocalDir, nFlags) CLASS TUpdate

  DEFAULT cIP := "localhost",;
          cUser := "anonymous",;
          cPW := "anonymous@localhost",;
          cFtpFolder := "/",;
          cZipFile := "",;
          cLocalDir := cFilePath( GetModuleFileName( GetInstance() ) ) + "Updates\"  ,;
          nFlags := 0

  ::cIP := cIp
  ::nFlags := nFlags   // special flags for ftp, eg. passive mode
  ::cUser := cUser
  ::cPW := cPW
  ::cFtpFolder := cFtpFolder
  ::cZipFile := cZipFile

  ::cAppFile := GetModuleFileName( GetInstance() )
  ::cAppDir  := cFilePath (GetModuleFileName( GetInstance() ) )
  ::cLocalDir := cLocalDir
  ::cUpdateBatch := ::cLocalDir + "
Update.cmd"

  IF !IsDir (::cLocalDir)                       // create updatefolder
    IF (::nError := MakeDir (::cLocalDir)) != 0
      MsgAlert (errLOCALDIR, txtHEAD)
    ENDIF
  ENDIF

  IF !IsAdmin ()                               //
    ::nError := 1
    MsgAlert (errADMIN, txtHEAD)
  ENDIF

RETURN (self)


//----------------------------------------------------------------------
METHOD End () CLASS TUpdate

  LOCAL bClose := {|| ::oFtp:END(), ::oInternet:END()}

  IF ::nError = 0
    MsgRun (txtDISCONNECT,,bClose)
  ENDIF

RETURN (nil)


//----------------------------------------------------------------------
METHOD Update () CLASS TUpdate

  LOCAL cFile, nSize, dDate, cTime, aTime
  LOCAL cFtpFile, dFtpDate, cFtpTime, nFtpSize
  LOCAL aF := {}, aFiles:={}
  LOCAL lIsFile := .f.  // update file exists ?

  LOCAL aUpdate := {}, lSuccess := .f.
  LOCAL bConnect := {|| ::oInternet := tInternet():New(),;
                        ::oFtp      := tFtp():New (::cIp, ::oInternet, ::cUser, ::cPW, ::nFlags) }

  IF ::nError != 0
    Return (nil)
  ENDIF

  IF !Empty (::cIP)

    CursorWait ()
    MsgRun (txtCONNECT,,bConnect)
    CursorArrow ()

    IF Empty (::oFtp:hFtp)
      MsgStop (errNOSERVER, txtHEAD)
      //::oFtp:END()
      //::oInternet:END()
    ELSE

      IF !::oFtp:SetCurrentDirectory( ::cFtpFolder )
//      IF ::oFtp:GetCurrentDirectory() <> ::cFtpFolder
        MsgStop (errFTPDIR, txtHEAD)
        RETURN (nil)
      ENDIF

      aFiles := ::oFtp:Directory (::cZipFile)     // all files in ftp folder

      IF !Empty (aFiles)
        AEval (aFiles, {|x| Aadd (aF, {ZTRIM (x[1]), x[2], x[3], x[4] } )} )

        cFtpFile := aF[1,1]   // filename
        dFtpDate := aF[1,3]   //
        cFtpTime := aF[1,4]   //
        nFtpSize := aF[1,2]   //

        cFile := ::cLocalDir + ::cZipFile // local file
        IF File (cFile)
          aTime := FileTimes ( cFile, 1 )
          dDate := CToD (Str( aTime[ 3 ], 2 ) + "
/" + StrZero( aTime[ 2 ], 2 ) + "/" + StrZero( aTime[ 1 ], 4 ))
          cTime := StrZero ( aTime[ 4 ], 2 ) + "
:" + StrZero( aTime[ 5 ], 2 ) + ":" + StrZero( aTime[ 6 ], 2 )
          nSize := FileSize ( cFile )
          lIsFile := .t.
        ENDIF

        IF !lIsFile .or. ;            // updatefile not present
           (dDate < dFtpDate).OR.;    // copmpare date and time
           (dDate == dFtpDate .AND. (TimeToSec (cTime ) < TimeToSec (cFtpTime) ) )

          IF MsgYesNo(txtNEWUPDATE, txtHEAD2)

            IF ::Download (cFtpFile , cFile, nFtpSize, dFtpDate, cFtpTime)
              ::oFtp:END()
              ::oInternet:END()
              IF ::WriteBatch ()
                CLOSE ALL
                WinExec (::cUpdateBatch)
                PostQuitMessage(0)
                QUIT
              ELSE
                MsgStop (errUPDATEFAIL, txtHEAD)
              ENDIF
            ENDIF

          ENDIF // MsgYesNo
        ELSE
          MsgInfo (txtNOUPDATE, txtHEAD)
        ENDIF // IF (dDate < dFtpDate).OR

      ELSE
        MsgInfo (txtNOUPDATE, txtHEAD)
      ENDIF // !Empty (aFiles)

    ENDIF  // Empty (::oFtp:hFtp)
  ENDIF // !Empty (::cIP)

RETURN (nil)



//----------------------------------------------------------------------
METHOD Download (cSource, cTarget, nSize, dDate, cTime) CLASS TUpdate

  LOCAL oDlg, oSay1, oSay2, oBtnCancel, oMeter1, oMeter2, nMeter1, nMeter2
  LOCAL lEnd:=.F., nAmount, lOk:=.F., lValRet:=.F.
  LOCAL hFile
  LOCAL cError1 := errDOWNLOAD
  LOCAL cError2 := errUNPACK

  // orange
  //  GRADIENT TRACK { { 1/2, nRGB( 198, 203, 213 ), nRGB( 219, 224, 233 ) },;
  //                              { 1/2, nRGB( 224, 238,237 ), nRGB( 224, 238,237 ) } } ;

  DEFINE DIALOG oDlg TITLE txtHEAD FROM 0,0 TO 10,50

   @ 0.5,01 SAY oSay1 PROMPT txtDOWNLOAD SIZE 80,8 OF oDlg
   @ 1.2,01 METEREX oMeter1 VAR nMeter1 SIZE 180,10 TOTAL nSize ;
                  GRADIENT TRACK { { 1/2, nRGB( 198, 203, 213 ), nRGB( 219, 224, 233 ) },;
                                 { 1/2, nRGB( 224, 238,237 ), nRGB( 224, 238,237 ) } } ;
                  OF oDlg

   @ 02 ,01 SAY oSay2 PROMPT txtUNPACK OF oDlg
   @ 2.7,01 METEREX oMeter2 VAR nMeter2 SIZE 180,10 TOTAL 0 ;
                  GRADIENT TRACK { { 1/2, nRGB( 198, 203, 213 ), nRGB( 219, 224, 233 ) },;
                                 { 1/2, nRGB( 224, 238,237 ), nRGB( 224, 238,237 ) } } ;
                  OF oDlg

   @ 3.2,12 BUTTON oBtnCancel PROMPT txtCANCEL ACTION ( lEnd := .t., SysRefresh(), oDlg:End() )

   oDlg:bStart := {|| lOk := ::DownloadFile ( cSource, nSize, oMeter1, @lEnd, oDlg, cTarget ),;
                      IIF (lOk, SetFDaTi (cTarget, dDate, cTime), MsgStop (cError1) ),;
                      IIF (lOk, lOk := ::UnPackFile (cTarget, oMeter2), ),;
                      IIF (lOk, (oBtnCancel:SetText( txtRESTART ), oBtnCancel:bAction := {|| lEnd := .f., oDlg:End()} ),;
                                 MsgStop (cError2) ) }

   ACTIVATE DIALOG oDlg CENTERED

   IF !lEnd .AND. lOk
     lValRet:=.T.
   ENDIF

RETURN (lValRet)


//----------------------------------------------------------------------------------------
METHOD DownloadFile ( cSource, nSize, oMeter, lEnd, oDlg, cTarget ) CLASS TUpdate

   LOCAL oFile, hTarget, lValRet:=.F.
   LOCAL nBufSize,cBuffer,nBytes := 0, nTotal := 0//, nFile:=0
   LOCAL lRet := .f.

   nBufSize := 4096
   cBuffer  := Space(nBufSize)
   hTarget  := FCreate (cTarget)

   oFile := tFtpFile():New( cSource, ::oFtp )
   oFile:OpenRead()

   SysRefresh()

   WHILE  ( nBytes := Len( cBuffer := oFile:Read( nBufSize ) ) ) > 0 .and. !lEnd
     FWrite( hTarget, cBuffer, nBytes )
     nTotal += nBytes
     oMeter:Set( nTotal )
     SysRefresh()
   END

   FClose( hTarget )
   oFile:End()

   IF nTotal > 0
     lRet := (nTotal==nSize)
   ENDIF

RETURN (lRet)


//----------------------------------------------------------------------------------------
METHOD UnPackFile (cZip, oMeter) CLASS TUpdate

  LOCAL aUpdate :={}, aFiles := {}, aUnzip := {}, n := 1
  LOCAL lSuccess := .f.
  LOCAL bProgress := {|| oMeter:Set (n++) }
  LOCAL cPath :=  cFilePath (cZip)

  aUpdate := hb_GetFilesInZip( cZip, .t. )

  IF Len (aUpdate) > 0

    AEval (aUpdate, {|x| Aadd (aFiles, {x[1], x[6], x[7]} ) } )
    AEval (aUpdate, {|x| Aadd (aUnzip, x[1]) } )
    oMeter:nTotal:= Len (aUnzip)

    lSuccess := hb_UnZipFile( cZip  , ;
                              bProgress,; //
                              nil,;       // lWithSubDir
                              nil,;       // cPassword
                              cPath,;     // cZipDir
                              aUnzip ,;
                              nil )       // bFileProgress

    AEval (aFiles, {|x| SetFDaTi (cPath+x[1], x[2], x[3]) } )  // restore original date and time !!

  ENDIF

  ::aUpdateFiles := AClone (aUnzip)

RETURN (lSuccess)


//-------------------------------------------------------------------------------
METHOD WriteBatch () CLASS TUpdate

  LOCAL hBatch,i
  LOCAL cBatch, cCopy := "
", cDel := "", cS := ["]

  FErase (::cUpdateBatch)

  FOR i := 1 TO Len (::aUpdateFiles)
    cCopy += "Copy /Y /B /V " + cS + ::cLocalDir + ::aUpdateFiles[i] + cS + " " + cS + ::cAppDir + cS + " > NUL" + CRLF
    cDel  += "Del /F " + cS + ::cLocalDir + ::aUpdateFiles[i] + cS +  " >NUL" + CRLF
  NEXT

  cBatch := "@Echo off"+CRLF+;
            "echo Updating ..."+CRLF+;
            "ping -n 2 127.0.0.1 > NUL"+CRLF+;    // waiting 2 secs
            cCopy +;
            "Start " + cS + "update" + cS + " " + cS + ::cAppFile + cS + CRLF +;
            cDel +;
            "EXIT"

  hBatch := FCreate (::cUpdateBatch,0)
  FWrite (hBatch, cBatch)
  FClose (hBatch)

RETURN (FError() = 0)



// FUNCIONES PARA CONVERIR HORA A SEGUNDOS, Y VICEVERSA
//--------------------------------------------------------
STATIC FUNCTION  TimeToSec( cTime )

  local nSec := 0, nLen, i, aLim, aMod, nInd, n

if cTime == NIL
   nSec := seconds()
elseif HB_ISCHAR( cTime )
   nLen := len( cTime )
   if ( nLen + 1 ) % 3 == 0 .and. nLen <= 11
      nInd := 1
      aLim := { 24, 60, 60, 100 }
      aMod := { 3600, 60, 1, 1/100 }
      for i := 1 to nLen step 3
         if isdigit( substr( cTime, i,     1 ) ) .and. ;
            isdigit( substr( cTime, i + 1, 1 ) ) .and. ;
            ( i == nLen - 1 .or. substr( cTime, i + 2, 1 ) == ":" ) .and. ;
            ( n := val( substr( cTime, i, 2 ) ) ) < aLim[ nInd ]
            nSec += n * aMod[ nInd ]
         else
            nSec := 0
            exit
         endif
         ++nInd
      next
   endif
 endif

RETURN (Round( nSec, 2)) /* round FL val to be sure that you can compare it */


//----------------------------------------------------------------------
#pragma BEGINDUMP

#include <WinTen.h>
#include <Windows.h>
#include <mapiwin.h>
#include <hbApi.h>
#include <CommDlg.h>

extern LPSTR LToStr( long w );

                     //nTime 1=Last Update, 2=Last Acces, 3=Creation, defecto last update
HB_FUNC( FILETIMES ) // params cFileName, nTime --> { nYear, nMonth, nDay, nHour, nMin, nSec }
{
   LPSTR cFileName = hb_parc( 1 ) ;
   int nTime       = ( ISNUM( 2 ) ? hb_parni( 2 ) :  1 ) ; // defaults to 1

   FILETIME ftCreate, ftAccess, ftWrite ;
   SYSTEMTIME stTime ;
   BOOL bRet ;
   HANDLE hFile = CreateFile( cFileName, GENERIC_READ, FILE_SHARE_READ, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0 ) ;

   if( ! hFile )
      return ;

   GetFileTime( (HANDLE) hFile, &ftCreate, &ftAccess, &ftWrite ) ;

   switch( nTime )
   {
      case 1 : // last update
         FileTimeToSystemTime( &ftWrite, &stTime ) ;
         break ;
      case 2 : // last access
         FileTimeToSystemTime( &ftAccess, &stTime ) ;
         break ;
      case 3 : // creation
         FileTimeToSystemTime( &ftCreate, &stTime ) ;
         break ;
      default : // last update
         FileTimeToSystemTime( &ftWrite, &stTime ) ;
         break ;
   }

   SystemTimeToTzSpecificLocalTime( NULL, &stTime, &stTime ) ;
   CloseHandle( hFile ) ;
   hb_reta( 6 ) ;
   hb_storni( stTime.wYear,   -1, 1 ) ;
   hb_storni( stTime.wMonth,  -1, 2 ) ;
   hb_storni( stTime.wDay,    -1, 3 ) ;
   hb_storni( stTime.wHour,   -1, 4 ) ;
   hb_storni( stTime.wMinute, -1, 5 ) ;
   hb_storni( stTime.wSecond, -1, 6 ) ;
}


#define FA_RDONLY           1   /* R */
#define FA_HIDDEN           2   /* H */
#define FA_SYSTEM           4   /* S */
#define FA_LABEL            8   /* V */
#define FA_DIREC           16   /* D */
#define FA_ARCH            32   /* A */
#define FA_NORMAL           0

HB_FUNC(FILESIZE)

   {
   LPCTSTR szFile;
   DWORD dwFlags=FILE_ATTRIBUTE_ARCHIVE;
   HANDLE hFind;
   WIN32_FIND_DATA  hFilesFind;
      int iAttr;
      if (hb_pcount() >=1){
         szFile=hb_parc(1);
         if (ISNUM(2))      {
            iAttr=hb_parnl(2);
         }
         else{
         iAttr=63;
         }
            if( iAttr & FA_RDONLY )
               dwFlags |= FILE_ATTRIBUTE_READONLY;

            if( iAttr & FA_HIDDEN )
               dwFlags |= FILE_ATTRIBUTE_HIDDEN;

            if( iAttr & FA_SYSTEM )
               dwFlags |= FILE_ATTRIBUTE_SYSTEM;
            if( iAttr & FA_NORMAL )
               dwFlags |=    FILE_ATTRIBUTE_NORMAL;

            hFind = FindFirstFile(szFile,&hFilesFind);
                  if (hFind != INVALID_HANDLE_VALUE){
                      if (dwFlags & hFilesFind.dwFileAttributes) {
                         if(hFilesFind.nFileSizeHigh>0)
                              hb_retnl((hFilesFind.nFileSizeHigh*MAXDWORD)+hFilesFind.nFileSizeLow);
                         else
                              hb_retnl(hFilesFind.nFileSizeLow);
                       }
                   else
                           hb_retnl(-1);
                     }

         }
}


HB_FUNC (ISADMIN)

{

  HANDLE hToken;
  PTOKEN_GROUPS pGroupInfo;
  DWORD dwSize = 0, dwResult;
  DWORD nError = 0, i;
  BOOL lError, lAdMin = FALSE;
  LPSTR cFunc = "";
  PSID   psidAdmin;
  CHAR cMess[200];
  SID_IDENTIFIER_AUTHORITY SystemSidAuthority= SECURITY_NT_AUTHORITY;

  if ( lError = (! OpenProcessToken(GetCurrentProcess(),TOKEN_QUERY,&hToken) ))
    {
     cFunc = "OpenProcessToken";
     nError = GetLastError();
     if (nError == ERROR_CALL_NOT_IMPLEMENTED)
       {
        hb_retl( TRUE );
        return;
       }
    }

  if ( ! lError &&  ! GetTokenInformation(hToken, TokenGroups, NULL, dwSize, &dwSize))
    {
      dwResult = GetLastError();
      if( lError=(dwResult != ERROR_INSUFFICIENT_BUFFER ))
       {
        nError = dwResult;
        cFunc = "GetTokenInformation";
       }
    }

  if ( ! lError )
   {
    pGroupInfo = (PTOKEN_GROUPS) GlobalAlloc( GPTR, dwSize );
    if( lError = (! GetTokenInformation(hToken, TokenGroups, pGroupInfo, dwSize, &dwSize ) ))
      {
        nError = GetLastError();
        cFunc = "GetTokenInformation";
      }
   }

  if ( ! lError )
    if ( lError = (! AllocateAndInitializeSid ( &SystemSidAuthority, 2, SECURITY_BUILTIN_DOMAIN_RID, DOMAIN_ALIAS_RID_ADMINS, 0, 0, 0, 0, 0, 0, &psidAdmin) ))
     {
      nError = GetLastError();
      cFunc = "AllocateAndInitializeSid";
     }

  if ( ! lError )
    {
      for( i=0; i<pGroupInfo->GroupCount; i++)
       {
          if ( EqualSid(psidAdmin, pGroupInfo->Groups[i].Sid) )
           {
               lAdMin = TRUE;
               break;
           }
       }
    }
  else
    {
      cMess[0]=0;
      lstrcat(cMess,"Error calling ");
      lstrcat(cMess,cFunc);
      lstrcat(cMess,": ");
      lstrcat(cMess,LToStr(nError));
      MessageBox(GetActiveWindow(),cMess,"Attention", MB_OK);
    }

  if (psidAdmin)
      FreeSid(psidAdmin);

  if ( pGroupInfo )
      GlobalFree( pGroupInfo );

  CloseHandle( hToken );
  hb_retl( lAdMin );

}
#pragma ENDDUMP
 
kind regards
Stefan
StefanHaupt
 
Posts: 824
Joined: Thu Oct 13, 2005 7:39 am
Location: Germany

Re: New class TUpdate

Postby Silvio.Falconi » Tue Jan 22, 2013 9:08 am

for the italian def

Code: Select all  Expand view
#ifdef ITALIAN
  #define txtHEAD  "Aggiornamento"
  #define txtHEAD2 "Controllo per nuove versioni"

  #define txtCONNECT    "Sto connettendo..."
  #define txtDISCONNECT "Sto Chiudendo la connessione..."
  #define txtNEWUPDATE "Trovata una nuova versione, devo aggiornare ?"
  #define txtNOUPDATE  "E' già installata l'ultima versione"

  #define txtDOWNLOAD "Sto scaricando gli archivi"
  #define txtUNPACK   "Unpack"
  #define txtCANCEL   "Annulla"
  #define txtRESTART  "Riavviare"

  #define errLOCALDIR "La cartella di aggiornamento non è stata creata"
  #define errADMIN    "Necessita un account amministratore per aggiornare"
  #define errNOSERVER "Server non trovato, nessuna connesione possibile"
  #define errFTPDIR   "La cartella di aggiornamento non esiste sul server"
  #define errUPDATEFAIL "Aggiornamento non è andato a buon fine"

  #define errDOWNLOAD "Errore durante il  download degli archivi"
  #define errUNPACK   "Errore durante  la decompressione degli archivi"
#endif
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
User avatar
Silvio.Falconi
 
Posts: 7052
Joined: Thu Oct 18, 2012 7:17 pm

Previous

Return to FiveWin for Harbour/xHarbour

Who is online

Users browsing this forum: Google [Bot] and 57 guests