I have a folder into a dialog
at the bottom of the dialog there is a buttonbar,
the dialogs (tabs) of the folder are not all of the same height, that is, some dialogs (tabs) are filled with several controls, others with just a few controls
I would like the dialog to change the height depending on the selected forder, can this be done in fivewin?
or do all the dialogs in the folder have to be the same size?
FiveTech Software tech support forums
www.FiveTechSoft.com
a folder into a dialog
29 posts • Page 1 of 2 • 1, 2
a folder into a dialog
by Silvio.Falconi » Sat Jun 08, 2024 3:56 pm
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
-
Silvio.Falconi - Posts: 7075
- Joined: Thu Oct 18, 2012 7:17 pm
Re: a folder into a dialog
by Otto » Sat Jun 08, 2024 5:23 pm
Silvio, Have I understood your function description correctly?
Should it look something like this?
Regards,
Otto
Should it look something like this?
Regards,
Otto
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org
https://www.facebook.com/groups/modharbour.club
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org
https://www.facebook.com/groups/modharbour.club
********************************************************************
-
Otto - Posts: 6346
- Joined: Fri Oct 07, 2005 7:07 pm
Re: a folder into a dialog
by Antonio Linares » Sun Jun 09, 2024 5:39 pm
Dear Silvio,
Please provide an example PRG to test it, thanks
Please provide an example PRG to test it, thanks
-
Antonio Linares - Site Admin
- Posts: 42122
- Joined: Thu Oct 06, 2005 5:47 pm
- Location: Spain
Re: a folder into a dialog
by Silvio.Falconi » Mon Jun 10, 2024 10:23 am
Antonio Linares wrote:Dear Silvio,
Please provide an example PRG to test it, thanks
here a small test
- Code: Select all Expand view RUN
- #include "FiveWin.ch"
#include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
Function Test()
local oDlg,oFld,oFont,oBold
local oBar,oBtnAnnulla,oBtnAiuto,oBtnConferma
local aFolder := {"Menu1","Menu2","Menu3","Menu4","Menu5","Menu6"}
local aCooDlg := {0,0}
local nBottom:= 41
local nRight := 94.6
local nHt := nBottom * DLG_CHARPIX_H
local nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[1]:=nWd
aCooDlg[2]:=nHt
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,,.t. )
DEFINE DIALOG oDlg SIZE aCooDlg[1], aCooDlg[2] PIXEL TRUEPIXEL;
FONT oFont title "test folder" COLOR CLR_BLACK, DLG_nColorDlg ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX)
//-------------------------------------------------ButtonBar
DEFINE BUTTONBAR oBar OF oDlg SIZE 84, 70 2015 BOTTOM NOBORDER
DEFINE BUTTON oBtnAnnulla OF oBar ;
FILENAME "DLG_NO";
PROMPT "Annulla" TOOLTIP "Esci" ;
ACTION ( oDlg:end( IDCANCEL ) )
DEFINE BUTTON oBtnAiuto OF oBar ;
FILENAME "HLP_DLG";
PROMPT "Aiuto" TOOLTIP "Aiuto" ;
ACTION NIL GROUP
DEFINE BUTTON oBtnConferma OF oBar BTNRIGHT ;
FILENAME "DLG_OK";
PROMPT "Conferma" ;
TOOLTIP "Conferma i dati" ;
ACTION ( oDlg:end( IDOK ) )
oBar:bClrGrad := { | lPressed | If( ! lPressed,;
{ { 1, DLG_nColorBar1, DLG_nColorBar1} },;
{ { 1, DLG_nColorBar2, DLG_nColorBar2} } ) }
//-----------------------------------------------------------------//
@100,0 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth,oDlg:nHeight-200 PIXEL ;
FONT oFont ;
COLOR nRgb( 245,244,234) ROUND 0
oFld:bAction:= { || change_size(oFld:nOption,aCooDlg,oDlg,oFld,oBar) }
oDlg:bResized := <||
local oRect := oDlg:GetCliRect()
oFld:nbottom := oRect:nBottom-100
RETURN nil
>
ACTIVATE DIALOG oDlg CENTER ;
ON INIT (oDlg:resize(), ChangeButtons( oBar ) )
RETURN NIL
//-----------------------------------------------------------------//
Function change_size(n,aCooDlg,oDlg,oFld,obar)
local nBottom,nHt
Do case
case n= 3
nBottom:= 32.4
nHt := nBottom * DLG_CHARPIX_H
case n= 6
nBottom:= 22
nHt := nBottom * DLG_CHARPIX_H
OTHERWISE
nHt := aCooDlg[2]
endcase
oDlg:setsize( aCooDlg[1],nHt)
eval( oDlg:bResized )
oBar:refresh()
RETURN NIL
//------------------------------------------------------------------------//
function ChangeButtons( oBar )
AEval( oBar:aControls, { | oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
return .T.
//----------------------------------------------//
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
-
Silvio.Falconi - Posts: 7075
- Joined: Thu Oct 18, 2012 7:17 pm
Re: a folder into a dialog
by karinha » Mon Jun 10, 2024 3:14 pm
Based on your example, I would do it like this:
Según tu ejemplo, lo haría así:
Regards, saludos.
Según tu ejemplo, lo haría así:
- Code: Select all Expand view RUN
// C:\FWH\SAMPLES\SILVFLD2.PRG
#Include "FiveWin.ch"
#Include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
#Define aPubGrad {| lInvert | If( lInvert, ;
{ { 1 / 3, nRGB( 255, 253, 222 ), nRGB( 255, 231, 151 ) }, ;
{ 2 / 3, nRGB( 255, 215, 84 ), nRGB( 255, 233, 162 ) } ;
}, ;
{ { 1 / 2, nRGB( 219, 230, 244 ), nRGB( 207 - 50, 221 - 25, 255 ) }, ;
{ 1 / 2, nRGB( 201 - 50, 217 - 25, 255 ), nRGB( 231, 242, 255 ) } ;
} ) }
STATIC oBtnAnnulla, oBtnAiuto, oBtnConferma
FUNCTION Test_Folder_Silvio()
LOCAL oDlg AS OBJECT
LOCAL oFld AS OBJECT
LOCAL oFont AS OBJECT
LOCAL oBold AS OBJECT
LOCAL oBar AS OBJECT
LOCAL oBrush AS OBJECT
LOCAL oImage AS OBJECT
LOCAL aFolder := { "Menu1", "Menu2", "Menu3", "Menu4", "Menu5", "Menu6" }
LOCAL aCooDlg := { 0, 0 }, aGrad, nLinha := 14
LOCAL nBottom := 41
LOCAL nRight := 94.6
LOCAL nHt := nBottom * DLG_CHARPIX_H
LOCAL nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[ 1 ] := nWd
aCooDlg[ 2 ] := nHt
SkinButtons()
aGrad := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
DEFINE BRUSH oBrush COLOR aGrad
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,, .T. )
DEFINE DIALOG oDlg SIZE aCooDlg[ 1 ], aCooDlg[ 2 ] PIXEL TRUEPIXEL ;
FONT oFont TITLE "Test Folder Advanced by Silvio Falconi" ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX ) BRUSH oBrush
DEFINE BUTTONBAR oBar BUTTONSIZE 40, 50 _3DLOOK TOP OF oDlg 2007
WITH OBJECT oBar // VER: ANCHO.PRG
oBar:bClrGrad := aPubGrad
oBar:bRClicked := { || ( NIL ) } // Mouse Direito
oBar:bLClicked := { || ( NIL ) } // Mouse Esquerdo
oBar:SetFont( oBold )
oBar:nClrText := CLR_HBLUE // BLACK
oBar:Adjust()
END
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\new.bmp" FLAT ;
ACTION MsgInfo( "New" ) ;
TOOLTIP "Creates a new document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\open.bmp" FLAT ;
ACTION MsgInfo( cGetFile( "*.*", "Select a document to open" ) ) ;
TOOLTIP "Opens a document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\floppy.bmp" FLAT ;
ACTION MsgInfo( Time() ) TOOLTIP "Saves this document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\printer.bmp" FLAT ;
ACTION MsgInfo( "Prints this document" ) TOOLTIP "Print this document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\prop.bmp" FLAT ;
ACTION( NIL ) TOOLTIP "Setup the printer" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\HelpInd.bmp" FLAT ;
ACTION MsgInfo( Version() ) TOOLTIP "A multiple lines" + ;
Chr( 13 ) + Chr( 10 ) + "tooltip!" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\Help.bmp" FLAT ;
ACTION MsgInfo( "fivewin power!" ) TOOLTIP "fivewin power!" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\Exit.bmp" FLAT ;
ACTION( oDlg:End() ) TOOLTIP "Exit this app" GROUP
@ 060, 0 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth, oDlg:nHeight - 200 PIXEL ;
FONT oFont COLOR aGrad ;
TAB HEIGHT 40 ROUND 5 TOP
WITH OBJECT oFld
:lTransparent := .T.
:aGradSel := { { 1.0, 3926784, 16777215 }, { 0.1, 3926784, 16777215 } } // Green
:aGradUnSel := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
:aGradOver := { { 1.0, 255, 16777215 }, { 0.1, 255, 16777215 } } // Red
:aGradOverUnSel := { { 1.0, 12824535, 16777215 }, { 0.1, 12824535, 16777215 } } // Purple
:aGradDis := { { 1.0, 15790320, 16777215 }, { 0.1, 15790320, 167772 } }
//
:SetOption( 1 )
:aEnable = { .T., .T., .T., .T., .T., .T., .F. }
:Show()
// :DisableTab( 3 ) // idem a :aEnable
// :oCursor := oHand
END
@ nLinha, 15 SAY "Código 1:" OF oFld:aDialogs[ 1 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 2:" OF oFld:aDialogs[ 2 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 3:" OF oFld:aDialogs[ 3 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 4:" OF oFld:aDialogs[ 4 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 5:" OF oFld:aDialogs[ 5 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 6:" OF oFld:aDialogs[ 6 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
oFld:bAction := {|| Change_Size( oFld:nOption, aCooDlg, oDlg, oFld, oBar ) }
oDlg:bResized := < ||
LOCAL oRect := oDlg:GetCliRect()
oFld:nbottom := oRect:nBottom - 100
RETURN NIL
>
@ 080, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
ACTIVATE DIALOG oDlg CENTERED ;
ON INIT ( oDlg:Resize(), ChangeButtons( oBar ) )
oBrush:End()
oBold:End()
oFont:End()
RETURN NIL
FUNCTION change_size( n, aCooDlg, oDlg, oFld, obar )
LOCAL nBottom, nHt
DO CASE
CASE n = 3
nBottom := 32.4
nHt := nBottom * DLG_CHARPIX_H
CASE n = 6
nBottom := 22
nHt := nBottom * DLG_CHARPIX_H
OTHERWISE
nHt := aCooDlg[ 2 ]
ENDCASE
oDlg:Hide()
oDlg:SetSize( aCooDlg[ 1 ], nHt )
oDlg:Show()
Eval( oDlg:bResized )
oBar:Refresh()
// oDlg:Refresh()
RETURN NIL
FUNCTION ChangeButtons( oBar )
AEval( oBar:aControls, {| oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
RETURN( .T. )
// FIN / END - kapiabafwh@gmail.com
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
Re: a folder into a dialog
by Silvio.Falconi » Tue Jun 11, 2024 8:09 am
karinha wrote:Based on your example, I would do it like this:
Según tu ejemplo, lo haría así:
- Code: Select all Expand view RUN
// C:\FWH\SAMPLES\SILVFLD2.PRG
#Include "FiveWin.ch"
#Include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
#Define aPubGrad {| lInvert | If( lInvert, ;
{ { 1 / 3, nRGB( 255, 253, 222 ), nRGB( 255, 231, 151 ) }, ;
{ 2 / 3, nRGB( 255, 215, 84 ), nRGB( 255, 233, 162 ) } ;
}, ;
{ { 1 / 2, nRGB( 219, 230, 244 ), nRGB( 207 - 50, 221 - 25, 255 ) }, ;
{ 1 / 2, nRGB( 201 - 50, 217 - 25, 255 ), nRGB( 231, 242, 255 ) } ;
} ) }
STATIC oBtnAnnulla, oBtnAiuto, oBtnConferma
FUNCTION Test_Folder_Silvio()
LOCAL oDlg AS OBJECT
LOCAL oFld AS OBJECT
LOCAL oFont AS OBJECT
LOCAL oBold AS OBJECT
LOCAL oBar AS OBJECT
LOCAL oBrush AS OBJECT
LOCAL oImage AS OBJECT
LOCAL aFolder := { "Menu1", "Menu2", "Menu3", "Menu4", "Menu5", "Menu6" }
LOCAL aCooDlg := { 0, 0 }, aGrad, nLinha := 14
LOCAL nBottom := 41
LOCAL nRight := 94.6
LOCAL nHt := nBottom * DLG_CHARPIX_H
LOCAL nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[ 1 ] := nWd
aCooDlg[ 2 ] := nHt
SkinButtons()
aGrad := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
DEFINE BRUSH oBrush COLOR aGrad
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,, .T. )
DEFINE DIALOG oDlg SIZE aCooDlg[ 1 ], aCooDlg[ 2 ] PIXEL TRUEPIXEL ;
FONT oFont TITLE "Test Folder Advanced by Silvio Falconi" ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX ) BRUSH oBrush
DEFINE BUTTONBAR oBar BUTTONSIZE 40, 50 _3DLOOK TOP OF oDlg 2007
WITH OBJECT oBar // VER: ANCHO.PRG
oBar:bClrGrad := aPubGrad
oBar:bRClicked := { || ( NIL ) } // Mouse Direito
oBar:bLClicked := { || ( NIL ) } // Mouse Esquerdo
oBar:SetFont( oBold )
oBar:nClrText := CLR_HBLUE // BLACK
oBar:Adjust()
END
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\new.bmp" FLAT ;
ACTION MsgInfo( "New" ) ;
TOOLTIP "Creates a new document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\open.bmp" FLAT ;
ACTION MsgInfo( cGetFile( "*.*", "Select a document to open" ) ) ;
TOOLTIP "Opens a document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\floppy.bmp" FLAT ;
ACTION MsgInfo( Time() ) TOOLTIP "Saves this document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\printer.bmp" FLAT ;
ACTION MsgInfo( "Prints this document" ) TOOLTIP "Print this document" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\prop.bmp" FLAT ;
ACTION( NIL ) TOOLTIP "Setup the printer" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\HelpInd.bmp" FLAT ;
ACTION MsgInfo( Version() ) TOOLTIP "A multiple lines" + ;
Chr( 13 ) + Chr( 10 ) + "tooltip!" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\Help.bmp" FLAT ;
ACTION MsgInfo( "fivewin power!" ) TOOLTIP "fivewin power!" GROUP
DEFINE BUTTON OF oBar FILENAME "..\bitmaps\16x16\Exit.bmp" FLAT ;
ACTION( oDlg:End() ) TOOLTIP "Exit this app" GROUP
@ 060, 0 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth, oDlg:nHeight - 200 PIXEL ;
FONT oFont COLOR aGrad ;
TAB HEIGHT 40 ROUND 5 TOP
WITH OBJECT oFld
:lTransparent := .T.
:aGradSel := { { 1.0, 3926784, 16777215 }, { 0.1, 3926784, 16777215 } } // Green
:aGradUnSel := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
:aGradOver := { { 1.0, 255, 16777215 }, { 0.1, 255, 16777215 } } // Red
:aGradOverUnSel := { { 1.0, 12824535, 16777215 }, { 0.1, 12824535, 16777215 } } // Purple
:aGradDis := { { 1.0, 15790320, 16777215 }, { 0.1, 15790320, 167772 } }
//
:SetOption( 1 )
:aEnable = { .T., .T., .T., .T., .T., .T., .F. }
:Show()
// :DisableTab( 3 ) // idem a :aEnable
// :oCursor := oHand
END
@ nLinha, 15 SAY "Código 1:" OF oFld:aDialogs[ 1 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 2:" OF oFld:aDialogs[ 2 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 3:" OF oFld:aDialogs[ 3 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 4:" OF oFld:aDialogs[ 4 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 5:" OF oFld:aDialogs[ 5 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "Código 6:" OF oFld:aDialogs[ 6 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
oFld:bAction := {|| Change_Size( oFld:nOption, aCooDlg, oDlg, oFld, oBar ) }
oDlg:bResized := < ||
LOCAL oRect := oDlg:GetCliRect()
oFld:nbottom := oRect:nBottom - 100
RETURN NIL
>
@ 080, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
ACTIVATE DIALOG oDlg CENTERED ;
ON INIT ( oDlg:Resize(), ChangeButtons( oBar ) )
oBrush:End()
oBold:End()
oFont:End()
RETURN NIL
FUNCTION change_size( n, aCooDlg, oDlg, oFld, obar )
LOCAL nBottom, nHt
DO CASE
CASE n = 3
nBottom := 32.4
nHt := nBottom * DLG_CHARPIX_H
CASE n = 6
nBottom := 22
nHt := nBottom * DLG_CHARPIX_H
OTHERWISE
nHt := aCooDlg[ 2 ]
ENDCASE
oDlg:Hide()
oDlg:SetSize( aCooDlg[ 1 ], nHt )
oDlg:Show()
Eval( oDlg:bResized )
oBar:Refresh()
// oDlg:Refresh()
RETURN NIL
FUNCTION ChangeButtons( oBar )
AEval( oBar:aControls, {| oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
RETURN( .T. )
// FIN / END - kapiabafwh@gmail.com
Regards, saludos.
Can you see that you haven't understood and that you want to force me to do what I shouldn't do?
See my sample
1) the buttonbar must be on downl not on top of the dialog
2) on the buttonbar there are only 3 buttons
3) please not change the colors
4) what is aPubGrad ?
5) what is SkinButtons() ?
I didn't ask for all those things you included in the example
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
-
Silvio.Falconi - Posts: 7075
- Joined: Thu Oct 18, 2012 7:17 pm
Re: a folder into a dialog
by Jimmy » Tue Jun 11, 2024 12:35 pm
hi Silvio,
as i remember right i had same Problem with height of FolderEX in a Dialog so i need to resize each FolderEX.
Sample from karinha does show a Way to resize FolderEX, but work not perfect as Body from MENU 6 is to small
i use absolute Value instead Value of Function oDlg:GetCliRect() for resize Body of FolderEX to get same height
as i remember right i had same Problem with height of FolderEX in a Dialog so i need to resize each FolderEX.
Sample from karinha does show a Way to resize FolderEX, but work not perfect as Body from MENU 6 is to small
i use absolute Value instead Value of Function oDlg:GetCliRect() for resize Body of FolderEX to get same height
greeting,
Jimmy
Jimmy
-
Jimmy - Posts: 1732
- Joined: Thu Sep 05, 2019 5:32 am
- Location: Hamburg, Germany
Re: a folder into a dialog
by karinha » Tue Jun 11, 2024 4:42 pm
Jimmy, Silvio, comprueba ahora si esto es correcto, por favor.
Jimmy, Silvio, check if this is correct now, please.
Regards, saludos.
Jimmy, Silvio, check if this is correct now, please.
- Code: Select all Expand view RUN
// C:\FWH\SAMPLES\SILVFLD3.PRG
#Include "FiveWin.ch"
#Include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
FUNCTION Test_Folder_Silvio()
LOCAL oNew AS OBJECT
LOCAL oOpen AS OBJECT
LOCAL oExit AS OBJECT
LOCAL oDlg AS OBJECT
LOCAL oFld AS OBJECT
LOCAL oFont AS OBJECT
LOCAL oBold AS OBJECT
LOCAL oBar AS OBJECT
LOCAL oBrush AS OBJECT
LOCAL oImage AS OBJECT
LOCAL oCursorBtn := TCursor():New(, 'HAND' )
LOCAL aFolder := { "Menu1", "Menu2", "Menu3", "Menu4", "Menu5", "Menu6" }
LOCAL aCooDlg := { 0, 0 }, aGrad, nLinha := 14
LOCAL nBottom := 41
LOCAL nRight := 94.6
LOCAL nHt := nBottom * DLG_CHARPIX_H
LOCAL nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[ 1 ] := nWd
aCooDlg[ 2 ] := nHt
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,, .T. )
DEFINE DIALOG oDlg SIZE aCooDlg[1], aCooDlg[2] PIXEL TRUEPIXEL ;
FONT oFont TITLE "Test Folderex" COLOR CLR_BLACK, DLG_nColorDlg ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX)
DEFINE BUTTONBAR oBar BUTTONSIZE 40, 50 _3DLOOK OF oDlg 2015 BOTTOM GDIPLUS
WITH OBJECT oBar
oBar:bClrGrad := { | lPressed | If( ! lPressed, ;
{ { 1, DLG_nColorBar1, DLG_nColorBar1} }, ;
{ { 1, DLG_nColorBar2, DLG_nColorBar2} } ) }
oBar:bRClicked := { || ( NIL ) } // Mouse Direito
oBar:bLClicked := { || ( NIL ) } // Mouse Esquerdo
oBar:SetFont( oFont )
oBar:nClrText := CLR_HBLUE
oBar:Adjust()
END
DEFINE BUTTON oNew OF oBar FILENAME "..\bitmaps\16x16\new.bmp" FLAT ;
PROMPT "&New" ACTION MsgInfo( "New" ) ;
TOOLTIP "Creates a new document" GROUP
DEFINE BUTTON oOpen OF oBar FILENAME "..\bitmaps\16x16\open.bmp" FLAT ;
PROMPT "&Open" ;
ACTION MsgInfo( cGetFile( "*.*", "Select a document to open" ) ) ;
TOOLTIP "Opens a document" GROUP
DEFINE BUTTON oExit OF oBar FILENAME "..\bitmaps\16x16\Exit.bmp" FLAT ;
PROMPT "&Exit" ACTION( oDlg:End() ) TOOLTIP "Exit this app" GROUP
@ 005, 000 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth, oDlg:nHeight - 200 PIXEL ;
FONT oFont COLOR aGrad TAB HEIGHT 30 ROUND 5 TOP
WITH OBJECT oFld
:lTransparent := .T.
:aGradSel := { { 1.0, 3926784, 16777215 }, { 0.1, 3926784, 16777215 } } // Green
:aGradUnSel := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
:aGradOver := { { 1.0, 255, 16777215 }, { 0.1, 255, 16777215 } } // Red
:aGradOverUnSel := { { 1.0, 12824535, 16777215 }, { 0.1, 12824535, 16777215 } } // Purple
:aGradDis := { { 1.0, 15790320, 16777215 }, { 0.1, 15790320, 167772 } }
//
:SetOption( 1 )
:aEnable = { .T., .T., .T., .T., .T., .T., .F. }
:Show()
// :DisableTab( 3 ) // idem a :aEnable
:oCursor := oCursorBtn
END
@ nLinha, 15 SAY "FOLDER 1:" OF oFld:aDialogs[ 1 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 2:" OF oFld:aDialogs[ 2 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 3:" OF oFld:aDialogs[ 3 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 4:" OF oFld:aDialogs[ 4 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 5:" OF oFld:aDialogs[ 5 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 6:" OF oFld:aDialogs[ 6 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
oFld:bAction := {|| Change_Size( oFld:nOption, aCooDlg, oDlg, oFld, oBar ) }
oDlg:bResized := < ||
LOCAL oRect := oDlg:GetCliRect()
oFld:nbottom := oRect:nBottom - 100
RETURN NIL
>
// only test
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 1 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 2 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 3 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 4 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 5 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 170, 90 SAY OemToAnsi( "Silvio Falconi, Este es un Show de Folderex." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS METRO_VIOLET, CLR_WHITE FONT oBold ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
ACTIVATE DIALOG oDlg CENTERED ;
ON INIT ( oDlg:Resize(), ChangeButtons( oBar ) )
oBold:End()
oFont:End()
RETURN NIL
FUNCTION Change_Size( n, aCooDlg, oDlg, oFld, oBar )
LOCAL nBottom, nHt
DO CASE
CASE n = 3
nBottom := 32.4
nHt := nBottom * DLG_CHARPIX_H + 28 // For Buttons in Dialog
CASE n = 6
nBottom := 22
nHt := nBottom * DLG_CHARPIX_H + 184 // For Buttons in Dialog
OTHERWISE
nHt := aCooDlg[ 2 ] // - 50 // Only test Silvio.
ENDCASE
oDlg:Hide()
oDlg:SetSize( aCooDlg[ 1 ], nHt )
oDlg:Show()
Eval( oDlg:bResized )
RETURN NIL
FUNCTION ChangeButtons( oBar ) // No comprendo esto. ??
AEval( oBar:aControls, {| oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
RETURN( .T. )
// FIN / END - kapiabafwh@gmail.com
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
Re: a folder into a dialog
by Jimmy » Wed Jun 12, 2024 5:25 am
hi.
Body height of FolderEX is OK, but DIalog changed height which seems me wrong
karinha wrote:Jimmy, Silvio, comprueba ahora si esto es correcto, por favor.
Jimmy, Silvio, check if this is correct now, please.
Body height of FolderEX is OK, but DIalog changed height which seems me wrong
greeting,
Jimmy
Jimmy
-
Jimmy - Posts: 1732
- Joined: Thu Sep 05, 2019 5:32 am
- Location: Hamburg, Germany
Re: a folder into a dialog
by karinha » Wed Jun 12, 2024 11:26 am
Good morning Jimmy, there is not enough height in the DIALOG, in options 3 and 6 to place the Button Bar.
Buenos días Jimmy, no hay suficiente altura en el DIALOG, en las opciones 3 y 6 para colocar la Button Bar.
Regards, saludos.
Buenos días Jimmy, no hay suficiente altura en el DIALOG, en las opciones 3 y 6 para colocar la Button Bar.
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
Re: a folder into a dialog
by Silvio.Falconi » Wed Jun 12, 2024 11:41 am
karinha wrote:Good morning Jimmy, there is not enough height in the DIALOG, in options 3 and 6 to place the Button Bar.
Buenos días Jimmy, no hay suficiente altura en el DIALOG, en las opciones 3 y 6 para colocar la Button Bar.
Regards, saludos.
I had no doubt that you would answer in this way, can you see that you didn't understand anything? if you look at the change_size function perhaps you would see that I change the dimensions of the dialog and the folder but you always want to impose your own changes while also making unsolicited additions
Since from 1991/1992 ( fw for clipper Rel. 14.4 - Momos)
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
I use : FiveWin for Harbour November 2023 - January 2024 - Harbour 3.2.0dev (harbour_bcc770_32_20240309) - Bcc7.70 - xMate ver. 1.15.3 - PellesC - mail: silvio[dot]falconi[at]gmail[dot]com
-
Silvio.Falconi - Posts: 7075
- Joined: Thu Oct 18, 2012 7:17 pm
Re: a folder into a dialog
by karinha » Wed Jun 12, 2024 11:52 am
hahaha, Silvio, you're not boring. If it works for you, use it. If it doesn't work for you, don't use it. your model does not work. Mine works. Although, I don't see any use in this FOLDEREX model that you created. Crazy thing like you. Have a good day.
jajaja, Silvio, no eres aburrido. Si te funciona, úsalo. Si no te funciona, no lo uses. tu modelo no funciona. El mío funciona. Aunque no veo ningún uso en este modelo FOLDEREX que creaste. Una cosa de loco como tú. Tenga un buen día.
Regards, saludos.
jajaja, Silvio, no eres aburrido. Si te funciona, úsalo. Si no te funciona, no lo uses. tu modelo no funciona. El mío funciona. Aunque no veo ningún uso en este modelo FOLDEREX que creaste. Una cosa de loco como tú. Tenga un buen día.
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
Re: a folder into a dialog
by Jimmy » Wed Jun 12, 2024 1:30 pm
hi Silvio,
why you made it complicate instead of using FIX value
why you made it complicate instead of using FIX value
- Code: Select all Expand view RUN
- // C:\FWH\SAMPLES\SILVFLD3.PRG
#Include "FiveWin.ch"
#Include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
FUNCTION Test_Folder_Silvio()
LOCAL oNew AS OBJECT
LOCAL oOpen AS OBJECT
LOCAL oExit AS OBJECT
LOCAL oDlg AS OBJECT
LOCAL oFld AS OBJECT
LOCAL oFont AS OBJECT
LOCAL oBold AS OBJECT
LOCAL oBar AS OBJECT
LOCAL oBrush AS OBJECT
LOCAL oImage AS OBJECT
LOCAL oCursorBtn := TCursor():New(, 'HAND' )
LOCAL aFolder := { "Menu1", "Menu2", "Menu3", "Menu4", "Menu5", "Menu6" }
LOCAL aCooDlg := { 0, 0 }, aGrad, nLinha := 14
LOCAL nBottom := 41
LOCAL nRight := 94.6
LOCAL nHt := nBottom * DLG_CHARPIX_H
LOCAL nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[ 1 ] := nWd
aCooDlg[ 2 ] := nHt
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,, .T. )
DEFINE DIALOG oDlg SIZE aCooDlg[1], aCooDlg[2] PIXEL TRUEPIXEL ;
FONT oFont TITLE "Test Folderex" COLOR CLR_BLACK, DLG_nColorDlg ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX)
DEFINE BUTTONBAR oBar BUTTONSIZE 40, 50 _3DLOOK OF oDlg 2015 BOTTOM GDIPLUS
WITH OBJECT oBar
oBar:bClrGrad := { | lPressed | If( ! lPressed, ;
{ { 1, DLG_nColorBar1, DLG_nColorBar1} }, ;
{ { 1, DLG_nColorBar2, DLG_nColorBar2} } ) }
oBar:bRClicked := { || ( NIL ) } // Mouse Direito
oBar:bLClicked := { || ( NIL ) } // Mouse Esquerdo
oBar:SetFont( oFont )
oBar:nClrText := CLR_HBLUE
oBar:Adjust()
END
DEFINE BUTTON oNew OF oBar FILENAME "..\bitmaps\16x16\new.bmp" FLAT ;
PROMPT "&New" ACTION MsgInfo( "New" ) ;
TOOLTIP "Creates a new document" GROUP
DEFINE BUTTON oOpen OF oBar FILENAME "..\bitmaps\16x16\open.bmp" FLAT ;
PROMPT "&Open" ;
ACTION MsgInfo( cGetFile( "*.*", "Select a document to open" ) ) ;
TOOLTIP "Opens a document" GROUP
DEFINE BUTTON oExit OF oBar FILENAME "..\bitmaps\16x16\Exit.bmp" FLAT ;
PROMPT "&Exit" ACTION( oDlg:End() ) TOOLTIP "Exit this app" GROUP
@ 005, 000 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth, oDlg:nHeight - 200 PIXEL ;
FONT oFont COLOR aGrad TAB HEIGHT 30 ROUND 5 TOP
WITH OBJECT oFld
:lTransparent := .T.
:aGradSel := { { 1.0, 3926784, 16777215 }, { 0.1, 3926784, 16777215 } } // Green
:aGradUnSel := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
:aGradOver := { { 1.0, 255, 16777215 }, { 0.1, 255, 16777215 } } // Red
:aGradOverUnSel := { { 1.0, 12824535, 16777215 }, { 0.1, 12824535, 16777215 } } // Purple
:aGradDis := { { 1.0, 15790320, 16777215 }, { 0.1, 15790320, 167772 } }
//
:SetOption( 1 )
:aEnable = { .T., .T., .T., .T., .T., .T., .F. }
:Show()
// :DisableTab( 3 ) // idem a :aEnable
:oCursor := oCursorBtn
END
@ nLinha, 15 SAY "FOLDER 1:" OF oFld:aDialogs[ 1 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 2:" OF oFld:aDialogs[ 2 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 3:" OF oFld:aDialogs[ 3 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 4:" OF oFld:aDialogs[ 4 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 5:" OF oFld:aDialogs[ 5 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 6:" OF oFld:aDialogs[ 6 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
oFld:bAction := {|| Change_Size( oFld:nOption, aCooDlg, oDlg, oFld, oBar ) }
oDlg:bResized := < ||
LOCAL oRect := {0,0,645,740} // USE fix value instead of Function oDlg:GetCliRect()
oFld:nbottom := 550 // oRect:nBottom - 100
RETURN NIL
>
// only test
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 1 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 2 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 3 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 4 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 5 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 170, 90 SAY OemToAnsi( "Silvio Falconi, Este es un Show de Folderex." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS METRO_VIOLET, CLR_WHITE FONT oBold ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
ACTIVATE DIALOG oDlg CENTERED ;
ON INIT ( oDlg:Resize(), ChangeButtons( oBar ) )
oBold:End()
oFont:End()
RETURN NIL
FUNCTION Change_Size( n, aCooDlg, oDlg, oFld, oBar )
LOCAL nBottom, nHt
/* not need when using FIX value
DO CASE
CASE n = 3
nBottom := 32.4
nHt := nBottom * DLG_CHARPIX_H + 28 // For Buttons in Dialog
CASE n = 6
nBottom := 22
nHt := nBottom * DLG_CHARPIX_H + 184 // For Buttons in Dialog
OTHERWISE
nHt := aCooDlg[ 2 ] // - 50 // Only test Silvio.
ENDCASE
*/
// USE fix value
nHt := 645
oDlg:Hide()
oDlg:SetSize( aCooDlg[ 1 ], nHt )
oDlg:Show()
Eval( oDlg:bResized )
RETURN NIL
FUNCTION ChangeButtons( oBar ) // No comprendo esto. ??
AEval( oBar:aControls, {| oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
RETURN( .T. )
greeting,
Jimmy
Jimmy
-
Jimmy - Posts: 1732
- Joined: Thu Sep 05, 2019 5:32 am
- Location: Hamburg, Germany
Re: a folder into a dialog
by karinha » Wed Jun 12, 2024 2:19 pm
Perfect Jimmy, but even so, I would never use this model. It doesn't make sense in a SIMPLE FOLDEREX.
Perfecto Jimmy, pero aun así nunca usaría este modelo. No tiene sentido en una SIMPLE FOLDEREX.
Regards, saludos.
Perfecto Jimmy, pero aun así nunca usaría este modelo. No tiene sentido en una SIMPLE FOLDEREX.
- Code: Select all Expand view RUN
// C:\FWH\SAMPLES\SILVFLD4.PRG
#include "FiveWin.ch"
#include "Constant.ch"
#define DLG_nColorDlg RGB(245,245,235)
#define DLG_nColortitle1 RGB(219,230,244)
#define DLG_nColortitle2 RGB(207,221,239)
#define DLG_nColorBar1 RGB(250,250,245)
#define DLG_nColorBar2 RGB(245,245,235)
#define DLG_nColorBtn1 RGB(245,245,235)
#define DLG_nColorBtn2 RGB(250,250,245)
#define DLG_nColorBtnB RGB(195,195,185)
FUNCTION Test_Folder_Silvio()
LOCAL oNew AS OBJECT
LOCAL oOpen AS OBJECT
LOCAL oExit AS OBJECT
LOCAL oDlg AS OBJECT
LOCAL oFld AS OBJECT
LOCAL oFont AS OBJECT
LOCAL oBold AS OBJECT
LOCAL oBar AS OBJECT
LOCAL oBrush AS OBJECT
LOCAL oImage AS OBJECT
LOCAL oCursorBtn := TCursor():New(, 'HAND' )
LOCAL aFolder := { "Menu1", "Menu2", "Menu3", "Menu4", "Menu5", "Menu6" }
LOCAL aCooDlg := { 0, 0 }, aGrad, nLinha := 14
LOCAL nBottom := 41
LOCAL nRight := 94.6
LOCAL nHt := nBottom * DLG_CHARPIX_H
LOCAL nWd := Max( nRight * DLG_CHARPIX_W, 180 )
aCooDlg[ 1 ] := nWd
aCooDlg[ 2 ] := nHt
oFont := TFont():New( "TAHOMA", 0, 18,, )
oBold := TFont():New( "TAHOMA", 0, 14,, .T. )
DEFINE DIALOG oDlg SIZE aCooDlg[ 1 ], aCooDlg[ 2 ] PIXEL TRUEPIXEL ;
FONT oFont TITLE "Test Folderex" COLOR CLR_BLACK, DLG_nColorDlg ;
STYLE nOR( DS_MODALFRAME, WS_POPUP, WS_CAPTION, WS_SYSMENU, ;
WS_MINIMIZEBOX )
DEFINE BUTTONBAR oBar BUTTONSIZE 40, 50 _3DLOOK OF oDlg 2015 BOTTOM GDIPLUS
WITH OBJECT oBar
oBar:bClrGrad := {| lPressed | If( ! lPressed, ;
{ { 1, DLG_nColorBar1, DLG_nColorBar1 } }, ;
{ { 1, DLG_nColorBar2, DLG_nColorBar2 } } ) }
oBar:bRClicked := {|| ( NIL ) } // Mouse Direito
oBar:bLClicked := {|| ( NIL ) } // Mouse Esquerdo
oBar:SetFont( oFont )
oBar:nClrText := CLR_HBLUE
oBar:Adjust()
END
DEFINE BUTTON oNew OF oBar FILENAME "..\bitmaps\16x16\new.bmp" FLAT ;
PROMPT "&New" ACTION MsgInfo( "New" ) ;
TOOLTIP "Creates a new document" GROUP
DEFINE BUTTON oOpen OF oBar FILENAME "..\bitmaps\16x16\open.bmp" FLAT ;
PROMPT "&Open" ;
ACTION MsgInfo( cGetFile( "*.*", "Select a document to open" ) ) ;
TOOLTIP "Opens a document" GROUP
DEFINE BUTTON oExit OF oBar FILENAME "..\bitmaps\16x16\Exit.bmp" FLAT ;
PROMPT "&Exit" ACTION( oDlg:End() ) TOOLTIP "Exit this app" GROUP
/*
@ 005, 000 FOLDEREX oFld PROMPTS aFolder ;
SIZE oDlg:nWidth, oDlg:nHeight - 200 PIXEL ;
FONT oFont COLOR aGrad TAB HEIGHT 30 ROUND 5 TOP
*/
// 12/06/2024 - Joao
@ 005, 018 FOLDEREX oFld PROMPTS aFolder SIZE 700, 540 PIXEL ;
FONT oFont COLOR aGrad TAB HEIGHT 30 ROUND 0 TOP
WITH OBJECT oFld
:lTransparent := .T.
:aGradSel := { { 1.0, 3926784, 16777215 }, { 0.1, 3926784, 16777215 } } // Green
:aGradUnSel := { { 1.0, 16744448, 16777215 }, { 0.1, 16744448, 16777215 } } // Blue
:aGradOver := { { 1.0, 255, 16777215 }, { 0.1, 255, 16777215 } } // Red
:aGradOverUnSel := { { 1.0, 12824535, 16777215 }, { 0.1, 12824535, 16777215 } } // Purple
:aGradDis := { { 1.0, 15790320, 16777215 }, { 0.1, 15790320, 167772 } }
//
:SetOption( 1 )
:aEnable = { .T., .T., .T., .T., .T., .T., .F. }
:Show()
// :DisableTab( 3 ) // idem a :aEnable
:oCursor := oCursorBtn
END
@ nLinha, 15 SAY "FOLDER 1:" OF oFld:aDialogs[ 1 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 2:" OF oFld:aDialogs[ 2 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 3:" OF oFld:aDialogs[ 3 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 4:" OF oFld:aDialogs[ 4 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 5:" OF oFld:aDialogs[ 5 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
@ nLinha, 15 SAY "FOLDER 6:" OF oFld:aDialogs[ 6 ] FONT oFont UPDATE ;
COLORS CLR_BLACK, CLR_WHITE TRANSPARENT SIZE 050, 12 PIXEL
oFld:bAction := {|| Change_Size( oFld:nOption, aCooDlg, oDlg, oFld, oBar ) }
oDlg:bResized := < ||
LOCAL oRect := { 0, 0, 645, 740 } // USE fix value instead of Function oDlg:GetCliRect()
oFld:nbottom := 550 // oRect:nBottom - 100
RETURN NIL
>
// only test
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 1 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 2 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 3 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 4 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 5 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
@ 170, 90 SAY OemToAnsi( "Silvio Falconi, Este ‚s un Show de Folderex." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS METRO_VIOLET, CLR_WHITE FONT oBold ;
TRANSPARENT UPDATE CENTER PIXEL
@ 178, 90 SAY OemToAnsi( "©Silvio Falconi Developer. All rights reserved." ) ;
OF oFld:aDialogs[ 6 ] SIZE 370, 18 COLORS CLR_BLACK, CLR_WHITE FONT oFont ;
TRANSPARENT UPDATE CENTER PIXEL
ACTIVATE DIALOG oDlg CENTERED ;
ON INIT ( oDlg:Resize(), ChangeButtons( oBar ) )
oBold:End()
oFont:End()
RETURN NIL
FUNCTION Change_Size( n, aCooDlg, oDlg, oFld, oBar )
LOCAL nBottom, nHt
/* not need when using FIX value
DO CASE
CASE n = 3
nBottom := 32.4
nHt := nBottom * DLG_CHARPIX_H + 28 // For Buttons in Dialog
CASE n = 6
nBottom := 22
nHt := nBottom * DLG_CHARPIX_H + 184 // For Buttons in Dialog
OTHERWISE
nHt := aCooDlg[ 2 ] // - 50 // Only test Silvio.
ENDCASE
*/
// USE fix value
nHt := 645
oDlg:Hide()
oDlg:SetSize( aCooDlg[ 1 ], nHt )
oDlg:Show()
Eval( oDlg:bResized )
RETURN NIL
FUNCTION ChangeButtons( oBar ) // No comprendo esto. ??
AEval( oBar:aControls, {| oCtrl | oCtrl:nTop += 4, oCtrl:nHeight -= 4 } )
RETURN( .T. )
// FIN / END
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
Re: a folder into a dialog
by karinha » Wed Jun 12, 2024 2:27 pm
Siempre prefiero el RESOURCE WORKSHOP de Borland. FOLDEREX siempre nota 1000. hahahahahaha,
I always prefer Borland RESOURCE WORKSHOP. Note 1000
https://imgur.com/JTt0C4t
Regards, saludos.
I always prefer Borland RESOURCE WORKSHOP. Note 1000
https://imgur.com/JTt0C4t
Regards, saludos.
João Santos - São Paulo - Brasil - Phone: +55(11)95150-7341
-
karinha - Posts: 7835
- Joined: Tue Dec 20, 2005 7:36 pm
- Location: São Paulo - Brasil
29 posts • Page 1 of 2 • 1, 2
Return to FiveWin for Harbour/xHarbour
Who is online
Users browsing this forum: No registered users and 38 guests